VeEX Sunrise RXT6000 100G Module

General

    CFP2 interface for 100GE and OTU4 applications
    QSFP+ for 40GE, OTU3 and STL256.4
    SFP+ for 100Base-FX, 1000Base-X, 10GEBase-X, OTU2/2e/1e, STM-64/OC192, and Fibre Channel 1/2/4/8/10G applications
    RJ45 for 10/100/1000Base-T applications
    External clock interface
    150ppm clock offset generation
    Eye diagram reference clock output
    Soft LED indicators 

Ethernet Testing

    Optical 100 Mbps to 100 Gbps Ethernet testing
    Electrical 10/100/1000 Mbps Ethernet testing
    Optical Lane BERT and CAUI-4/XLAUI Lane BERT
    PCS Layer Testing with Skew generation/monitoring
    Multi-stream testing up to 32 independent streams
    IEEE 802.3ah, ITU-T Y.1731, IEEE 802.1ag, and MPLS-TP OAM support
    Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB, EoE support
    MAC flooding and VLAN flooding
    RFC2544 and V-SAM (Y.1564) testing
    Service Disruption Measurements
    IPv4 and IPv6 traffic generation
    BERT and Throughput testing at Layer 2 and Layer 3
    Smart Loopback mode for Layer 2 and Layer 3
    One-Way-Delay latency measurement (GPS assisted)
    Line rate packet capture with Wireshark™ decode
    Error and Alarm Injection

SDH/SONET Testing

    STL256.4, STM-256, OC-768
    STM-0 to STM-64, OC-1 to OC-192
    Available as Line Rate or mapped into OTUk payload
    Test payload multiplexing down to VC11/VT1.5 with PDH and Dsn

OTN Testing

    OTN testing for OTU1, OTU2, OTU1e, OTU2e, OTU3 and OTU4
    Complete multi-stage Mapping/Multiplexing
    Ethernet over OTN
    Service Disruption measurements
    Tandem Connection Monitoring
    Overhead monitoring and byte decoding
    Terminate, payload through and line through test modes
    Payload and Line through monitor modes
    Per-lane optical power and frequency measurements
    External clock reference interface
    Histogram Analysis  

CFP2/QSFP+ Support

    Optical lane BERT
    PCS layer testing with skew generation/monitoring
    Transmit and receive optical power measurement
    Module status display

See Data Sheet

• CFP2-LR4 Receive Optical Power per lane
• CFP2-LR4 Transmit Optical Power per lane
• CFP2 Module vendor specific information display
• CFP2 Module temperature, alarm and failure information display
• Example of 100GE Layer 2 100% throughput test result display
• 100GE V-SAM test results with 8 services. RXT-6000 is able to perform up to 32 services
• CFP2-LR4 PCS analysis for alarms and errors
• CFP2-LR4 PCS, CAUI, Virtue lane and skew control setup

The RXT-6000 Universal Ethernet Module is a full featured solution for 10/100/1000Base-T, 100Base-FX, 1000Base-X, 40GE, 100GE, OTU2, OTU3 and OTU4, mobile backhaul and carrier Ethernet networks.