Tel: +44 (0)1296 678510
E-Learning
 
The UK's Leading Telecoms, Datacoms Test & Management solutions.


Pay with PayPal, PayPal Credit or any major credit card

Related Items

VeEX Sunrise MTT C Platforms and Modules
VeEX Sunrise MTT C Platforms and Modules The VeEX Sunrise MTT (Modular Test Toolkit) for Metro, DSL, Transport, Optics and Service Testing. The Sunrise MTT C i... Read More
 
VeEX Sunrise RXT-1200 Test Platform
VeEX Sunrise RXT-1200 Test Platform The new and completely redesigned RXT-1200™ addresses the challenges of communication service providers to increa... Read More
 
VrEX Sunrise Logo
 
VeEX Sunrise MTT38 SDH SONET Module
 
Technology

xDSL

VeEX Sunrise SSMTT-38 SDH/SONET Module

SSMTT-38 | Sunrise Telecom Testers cover Multi-technologies incl DSL OTDR OPM OLS VFL OSA Fiber Optics DSn/PDH SONET/SDH SHDSL OTN TDR/DMM IEEE C37.94 Ethernet Fibre Channel CPRI/OBSAI Bonded UDSL MTT Sunlite SSMTT RXT

Sunrise Telecom (now VeEX) products & solutions are only available in the UK from Frame Communications Ltd.

A lot of the Sunrise Telecom products have been discontinued so call Frame Communications 01296 678510 to discuss upgrade / trade-in possibilities if applicable so you can protect your investment going forward ..

Part of the VeEX Modular Test Toolkit (MTT) family of products,  the MTT-38 SDH/SONET is a rugged, battery-operated test solution for SDH SONET PDH, and T-Carrier circuits from 2.5 Gbps to 2 Mbps/1.5 Mbps

The Sunrise MTT-38 features overhead monitoring and control, APS timing measurement, and pointer test sequences. Both in-service and out-of-service configurations cover installation, maintenance, and troubleshooting applications.Auto-configuration takes the guesswork out of configuring the instrument to the circuit under test. All measurements conform to industry standards, and circuit impairments are displayed in a variety of ways, giving operators insight into the possible causes of circuit impairments.

Platform Highlights

  • SDH/SONET feature-rich
  • Lightweight
  • Flexible modular design
  • Eliminates the need for multiple instruments
  • Leverages existing Sunrise MTT platform
  • Intuitive and easy-to-use
  • Cost-effective and future-proof
  • Also supported in RXT-1200 platform (RXT-2380 module)

Key Features

  • Bit error ratio testing and performance analysis
  • Pointer monitoring and test sequence generation
  • Auto-configuration
  • APS timing measurement
  • Histogram and event log for errors and alarms
  • Comprehensive payload mapping selection from VC4-16c/ OC-48c (contiguous concatenation) to VC12/ VT2, VC11 VT1.5, including PDH/ T-Carrier payloads (1.5M, 2M, 34M, and 45M/DS1, E1, DS3, and T3)
Lamda (nm) Output Power (dBm) Distance (km) Rx Wavelength(nm) Input Sensitivity(dBm) 
STM-16/4/1/0, OC-48/12/3/1
1310 SR      -10 to -3     < 2       1266 to 1580      -18 to -3  
1310 IR     -5 to 0     < 15    1260 to 1580      -18 to 0
1310 LR      -2 to +3     < 40    1280 to 1335      -27 to 9
1550 IR      -5 to 0     < 40     1430 to 1580      -18 to 0 
1550 LR      -2 to +3      < 80    1500 to 1580      -18 to 9  
Data rates supported: 2488, 022, 155, 52 Mbps SONET and SDH  
STM-4/1/0, OC-12/3/1
1310 IR      -15 to -8      < 15       1261 to 1360     -28 to -8  
1310 LR      -3 to +2      < 40    1280 to 1335      -28 to -8    
1550 LR      -3 to +2      < 80       1480 to 1580      -28 to -8  
Data rates supported: 022, 155, 52 Mbps SONET and SDH

 

 

 

 

 

 

 

SDH/SONET


155 Mbps Electrical (STM-1) MTT-38-155ME
Connector: 75 ohm unbalanced SMG
External clock: Bantam

Transmitter
Clock source: Internal, Loop, External

Receiver
Frequency recovery range: 155.520 Mbps ± 50 ppm

52 Mbps (STS-1)
Connector: BNC

Transmitter
Clock source: Internal, Loop

Receiver
Frequency recovery range: 51.840 Mbps ± 50 ppm

PDH/T-carrier Testing


45 Mbps (DS3, T-Carrier)
Connector: BNC

Transmitter
Clock source: Internal, Loop
Alarm generation

Receiver
Frequency recovery range: 44.736 Mbps ± 50 ppm

34 Mbps (E3, PDH)
Connector: BNC

Transmitter
Clock source: Internal, LoopError injection
Alarm generation
Receiver
Frequency recovery range: 34.368 Mbps ± 50 ppm

2 Mbps (E1, PDH)
Connector: RJ-45
External clock: Bantam

Transmitter
Clock source: Internal, External, Loop
Error injection
Alarm generation
Fractional E1
Through mode

Receiver
Frequency recovery range: 2.048 Mbps ± 50 ppm

1.544 Mbps (DS1, T-Carrier)
Connector: RJ-45
External clock: Bantam

Transmitter
Clock source: Internal, External, Loop
Error injection
Alarm generation
Fractional T1
Through mode

Receiver
Frequency recovery range: 1.544 Mbps ± 50 ppm

DS1, E1, E3, DS3
Error Performance: G.821, G.826 and M.2100
Errors/Alarms
Frequency measurements

Other Features
Loopback and Span Control
CSU/NIU Emulation
Propagation Delay
DS1 HDSL Span Control
DS3 FEAC
DS1/E1 View Received Data
E1 View FAS words
E1 View MFAS words
E1 Send Frame words

ATM Testing
Interface: UNI and NNI per ITU-T I.361
Quality of Service
Traffic Supervision
ATM View Test Records
VCC ScanCell Capture & Decode
Traffic Generation
DSLAM Testing
ATM/IP PING Test 

VeEX Sunrise MTT38 SDH SONET Spec

 



  • Installation, maintenance, and troubleshooting
  • Out-of-service testingVeEX Sunrise MTT38 SDH SONET Module for out of service testing
  • In-service monitoring through protected monitoring points or optical splitters

    VeEX Sunrise MTT38 SDH SONET Module In service monitoring through optical points splits
  • Round trip delay

    VeEX Sunrise MTT38 SDH SONET Module for Round trip delay

 

SDH/SONET

Operation Modes
Point-to-point
Payload through (2.5G and below)
Line through

SDH Optical (ITU-T G.707)
Connector: SFP, duplex LC
Rates: STM-16 (2.5 Gbps), STM-4 (622 Mbps), STM-1 (155 Mbps), STM-0 (52 Mbps)
Payloads: From 1.5/2M to VC4-16c
ITU-T mapping
Error injection
Alarm generation
Results measurements
Errors/Alarms
Performance: G.821, G.826, G.828, G.829, M.2101/2110
SDH pointer: Justification, increase, decrease

SONET Optical (Telcordia GR-253-CORE)
Connector: SFP, duplex LC
Rates: OC-48 (2.5 Gbps), OC-12 (622 Mbps), OC-3 (155 Mbps), OC-1/STS-1 (52 Mbps)
Payloads: From DS1/VT1.5 to STS-48c SPEError injection
Alarm generation
Results measurements
GR-253 bit performance
SONET defects
SONET pointer: Justification, increase, decrease

Test Patterns
PRBS, Fixed and User Programmable

Measurements Common to SDH/SONET
Optical power level measurement
Signal level measurement
Event log with timestamp
Frequency
Automatic tributary scan
Service Disruption measurement

SDH/SONET Overhead Features
ASCII decode of 16-byte or 64-byte HP/STS or LP/VT path trace bytes (J1/J2)
Programming K1/K2 APS signaling bytes
J0 Section trace generation
J1/J2 Path trace generation
S1 synchronization status messages decode and generation
Path overhead monitor
Programming of path overhead bytes
Pointer monitor: H1, H2, V1, V2 bytes
Pointer adjustment
Pointer test control
Pointer Test Sequences
Automatic Protection Switch Time Measurement
Tandem Connection Monitoring (HP/LP)

Part of the VeEX Modular Test Toolkit (MTT) family of products, the MTT-38 SDH/SONET is a rugged, battery-operated test solution for SDH SONET PDH, and T-Carrier circuits from 2.5 Gbps to 2 Mbps/1.5 Mbps



VeEX Sunrise SSMTT- 38 SDH/SONET Module SSMTT-38 | Data Sheet
Products in this range...
VeEX MTTplus
VeEX MTTplus The MTTplus platform builds on the legacy of the legendary MTT , providing a compact, powerful and cost-effective mo... Read More
 
VeEX Sunrise MTT C Platforms and Modules
VeEX Sunrise MTT C Platforms and Modules The VeEX Sunrise MTT (Modular Test Toolkit) for Metro, DSL, Transport, Optics and Service Testing. The Sunrise MTT C i... Read More
 
VeEX Sunrise RXT-1200 Test Platform
VeEX Sunrise RXT-1200 Test Platform The new and completely redesigned RXT-1200™ addresses the challenges of communication service providers to increa... Read More
 
VeEX Sunrise SSMTT-14B SHDSL Module
VeEX Sunrise SSMTT-14B SHDSL Module Sunrise Telecom (now VeEX) products & solutions are only available in the UK from Frame Communications Ltd. A ... Read More