Splice Right First Time
All in one design with 5 functions.
Automation to get your splice right every time.
Low maintenance – keep your splicers in the field.
High tensile strength due to thermal stripping.
|Stripping||The KF33A FTTH splicer futures an automatic stripper that removes the fibre coating and cladding, exposing the fibre core ready for splicing in just one second.|
|Cleaving||The single action cleaver makes a 90 degree cleave to the fibre end. The rotating cleaver blade can cleave up to 75,000 fibres before requiring replacement. Sharp ends are captured within the attached sharps container.|
|Cleaning||The built-in one-touch cleaning pump enables the technician to immediately clean the fibre end upon cleaving.|
|Splicing||The splicer automatically aligns the fibres and splices the fibre ends. The electrodes can support up to 38,000 splices before requiring replacement. Following the completion of the splice the quality is automatically tested through a tension test, ensuring the splice is good.|
|Protection||The splice is protected throughout the application of a heat-shrink splice protector. The built-in sleeving unit applies the splice protector within 30 seconds.|
5 Integrated Functions
Always have all the tools you need to finish the job.
Low maintenance, high availability
The K33A combines long-lasting durability with high precision performance.
splices without electrode change
cleaves without maintenance
Easy, Automated Splicing
Start Using The K33A Splicer
Increased splice quality, reduced maintenance. Do more.