A next generation CATV installer meter to characterize and measure Analog and Digital video signals.
For Analog carriers, Peak Video level, single or dual channel Audio levels and Carrier to Noise (C/N) measurements are possible on NTSC, PAL, or SECAM video formats. Digital QAM16/64/256 carriers with or without deep Interleaving are measured accurately with MER, BER and Constellation diagram results being reported.
Tilt, Quick Test, and Forward/Reverse ingress scan are standard features.
The built-in Ethernet port supports Triple Play test features, such as VoIP call emulation with MOS scoring, Web-browser, IP connection testing, remote control, test results upload/download, and system management. WiFi connectivity tests can be performed using a USB WiFi adaptor.
Intuitive presentation of measurements with test graphics
High resolution color touch-screen viewable in any lighting conditions fitted with protective cover
Robust, handheld chassis packed with powerful and flexible features for demanding environments and test conditions
Optimized for field engineers or technicians installing and maintaining CATV networks enabling triple play services
Ethernet port and connection for back office applications, workforce management and triple play service verification
USB memory stick, Bluetooth adaptor, and FTP upload capability for test result storage and file transfer respectively
Maintain instrument software, manage test configurations, process measurement results and generate customer test reports using included ReVeal™ PC software
Extend field testing time using interchangeable LiIon battery pack/s. Greater battery autonomy provided in standby mode
Supports advanced IP testing; Ping, trace route, ARP Wiz, VoIP, IPTV, WiFi, Web browser, and FTP upload/download via Ethernet or USB port where applicable
Perform remote testing and monitoring using the remote control option via standard Ethernet interface
NetWiz cable diagnosis with network statistics*
VoIP call emulation and MOS performance analysis*
WiFi Wiz site survey with Internet and VoIP check*
Frequency analysis from 5 to 1000 MHz
Supports Annex A and B signal formats
Comprehensive SLM features
Fast system scan mode of the entire active channel plan
Installation test procedures with location specific limits
Single-channel measurements with Min/Max thresholds
Tilt measurements to indicate distortion over the frequency spectrum allowing technicians to apply correct equalization
Measure power level of NTSC, PAL and SECAM video signals
Carrier-to-Noise (C/N); Adjacent Channel measurement ratio
MER and Pre/Post BER measurements of QAM carriers with Constellation diagram and Histogram
Forward and Reverse path ingress scan to detect noise and/or CSO/CTB interference