The VeEX DI-1000 digital fiber inspection scope provides clear images of the connector’s end face. Focusing on the contact areas, the DI-1000 grades the connector’s health and cleanliness after it is polished or cleaned. The results determine whether the connector can be used or if it needs to be polished or cleaned again.
Dirty or scratched connectors introduce loss, increase ORL and can damage other connectors. End-face contamination is a leading cause of fiber link failures in Telecom, MSOs, data centers, and corporate network environments.
The ergonomically designed DI-1000 connects directly to PCs and VeEX test sets through its USB 2.0 port. The DI-1000 features an easy single-finger focusing knob, comprehensive list of tips and digital image sensor and optics with detectable resolution to 0.5 μm.
The DI-1000 is compatible with VeEX test sets offering built-in Pass/Fail analysis with fast and accurate Auto Focus Detection. This technology still relies on the incredible fast response and finesse of human hands, but leaves the focus assessment, image capturing and analysis to the test set. No training is necessary, yet beginners can get it right every time.
The test set detects when the image has reached optimal focus level, automatically freezes the picture, captures the image and runs the IEC 61300-3-35 analysis
Much faster focus, acquisition and analysis, compared to slow electro-mechanical auto-focusing scopes
No need to move the hands or press any buttons (movement and vibration are common causes of focus loss)
No PC required for image acquisition or Pass/Fail analysis
Users still remain in control during non-trivial scenarios requiring the irreplaceable human dexterity and ingenuity
Report generation (html and PDF) directly from the test set
Compare function for images captured before and after cleanin
Precise and stable single-finger focus knob
One hand operation
Inspect patch cords and bulkheads
Compatible with UX400, TX300-Series, FX300, RXT-1200, SunLite OTDR+ and PCs