The Optical Termination Outlet – OTO₂ marks the end of the operator’s network. Mounted at the entrance of the dwelling, usually on a wall or inside the communications cabinet. The Omelcom OTO₂ with the pigtail is easy to use.
The mounting holes are completely separated from the areas where the cables are coiled and spliced, making the OTO₂, particularly easy to use. The base of the enclosure is where the mounting holes and cable routing and anchoring guides are located. All of the fibre optic components are located in the cassette. This makes it less likely to damage fibres when mounting the outlet. And, because the cassette can be unclipped from the base, it is easy to access the fibre-optic connections later if needed.
The outlet can be mounted using double-sided adhesive tape, screw-mounted to a wall, installed in a flush-mount wall box, or clipped onto a DIN rail. And, with five cable routing options, the outlet is simple to install along a baseboard, on a wall, or in a flush-mount wall box.
The OTO₂ kit with the pigtail includes: 1 OTO₂, 10F SC/APC + PIGTAIL, 1- OTO₂ 20F SC/APC + PIGTAIL & 1 – OTO₂ 40F SC/APC + PIGTAIL